Hayward Products Firmware
Firmware Updates
Unleashing peak performance: stay updated with the latest firmware enhancements.
Unleashing peak performance: stay updated with the latest firmware enhancements.
FIRMWARE UPDATES
For OmniLogic simply plug it into the side of the Local Display behind the Dead Front. For OmniPL and OmniHub, you will need to access the port on the bottom of the display.
Below you will find the latest Hayward OmniLogic Controls Firmware updates available. Please locate the Hardware that you would like to update and download the latest Firmware onto your USB memory stick. You will need to bring the USB memory stick to the Omni Control product. For OmniLogic and OmniPL, simply plug it into the side of the Local Display behind the Dead Front. For OmniHub, you will need to access the port on the bottom of the display. Next, you will need to access service mode through the power button on the bottom left corner of the main screen and from the next menu find the upgrade button, then pick the component or remote that you are upgrading. The Omni controllers will automatically reboot after the upgrade is complete. We suggest you consult your pool professional when upgrading OmniLogic firmware.
AQRS3 FIRMWARE UPDATES
These files are to be used for USB upgrades for AQRS3 Non-Omni - Standalone units. The files below are not to be used to upgrade through an Omni but directly through USB for the AQRS3 standalone units.
*In order to install firmware, installation files must be on the root directory of the USB drive.
*It is best if you download the firmware in Chrome, Firefox or Safari browsers. If you download in Internet Explorer, once your download is complete, please remove the ".TXT" extension from the file on the USB device.